When measuring a cylinder for wear, the most wear will be found at the ________
A) Middle of the cylinder B) Bottom of cylinder
C) Top of cylinder D) 5 inches from the top
C
You might also like to view...
While having a discussion, Technician A says that crash event recordings can tell the speed of the vehicle, whether the brakes were applied and ABS was engaged, how far the throttle was open and the rpm of the engine. Technician B says that the recordings can tell whether the seat belts were in use and the amount of change in velocity of the vehicle during the crash. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
The term steer comes from the action that takes place when the equipment is steered, using the principle that when one side speeds up, the other slows down in equal proportion.
A. crab B. differential C. articulated D. front wheel
If you have to make a vehicle inspection report you must sign it
a. When any defects are noted whether they are certified to be repaired or not. b. Only when defects are noted that are certified to be repaired. c. Only when defects are noted that are certified to not need repair.
(a) Draw the flow curve and obtain the liquid limit. (b) What is the plasticity index of the soil?
A plastic limit test for a soil showed that moisture content was 18.0%. Data from a
liquid limit test were as follows:
What will be an ideal response?