Answer the following statement(s) true (T) or false (F)
1. The flat track repair can be made using either pieces of track from a similar type of board that has been scrapped or from commercial pieces of plain or tinned copper.
2. When the break is in excess of 1/8" (3.18 mm), it is recommended that the track being repaired be cut at 45°.
3. It is more difficult to hold a round wire in place onto a rounded surface. By slightly flattening the wire with serrated needle-nosed pliers, it will be easier to hold the wire in place.
4. The funnellette provides the most reliable type of repair for a double-sided board.
5. The soldering process should include the flow of solder from the lead to the eyelette to the pad, on both sides of a double-sided board.
1. True
2. True
3. False
4. True
5. True
You might also like to view...
When hammering an aluminum part, it is best to pound with _______
A) An iron hammer B) A steel hammer C) A plastic mallet D) None of these
Which refrigerant will likely become scarce after the year 2020?
a. HCFC-123 b. HFC-410A c. HFC-134a d. Ammonia
Shingles are typically specified on drawings in note form listing the:
A. material B. weight C. underlayment D. color E. all of the above
Precision sheet metal prints require close tolerances and bend allowance calculations.
Answer the following statement true (T) or false (F)