The main reason the switches are connected in series is so that if any one of the switches opens, current to the load will be interrupted
Indicate whether the statement is true or false
TRUE
You might also like to view...
A two-pipe system should be installed with the suction at the oil pump greater than what measure?
A) 16 in Hg B) 6 in Hg C) 17 in Hg D) 12 in Hg
In the 1F and 2F fillet-welding positions, the weld axis can be inclined up to _____
a. 30 degrees b. 20 degrees c. 15 degrees d. 10 degrees
What are the major differences between the 5400 and 7400 series of ICS?
A) The 5400 series are military grade and allow for a wider range of supply voltage and temperatures. B) The 7400 series are an improvement over the original 5400s. C) The 7400 series was originally developed by Texas Instruments; the 5400 series was brought out by National Semiconductors after TI's patents expired, as a second supply source. D) The 5400 series are military grade and require tighter supply voltages and temperatures.
The grades of fuel oil are 1 through 6 with:
A) 6 being the lightest and most distilled and having the highest heating capacity. B) 1 being the lightest and most distilled and having the highest heating capacity. C) 1 being the lightest and most distilled and having the lowest heating capacity. D) 6 being the lightest and most distilled and having the lowest heating capacity.