If shoe molding is being used with a baseboard, the shoe molding should be nailed _____
a. every 6"
b. into the baseboard
c. into the floor
d. every 16"
c
You might also like to view...
Basic components of a safety program include a management policy statement, emergency action plans, and _____.
a. a labor-management liaison b. a policy on alcohol and drug abuse c. administrative succession plans d. a conflict resolution program
Which of the following types of transformers can be ventilated, air-cooled, or sealed?
a. Dry-type transformers b. Less-flammable liquid-insulated transformers c. Oil-insulated transformers d. Nonflammable fluid-insulated transformers
To contain backing gas in a pipe of small diameter, or short sections of pipe, ____.
A. the ends of the pipe are capped B. the pipe is plugged on either side of the weld C. the pipe is plugged using water-soluble plugs D. the pipe is plugged using soft plastic bags
Refrigerant migration into the compressor crankcase will not usually occur if the temperature where the compressor is located is kept well above the _____.
a. height of the evaporator b. height of the condenser c. temperature of the thermostat d. temperature of system piping and components