Technician A says that mixing small amounts of refrigerant is acceptable according to the EPA. Technician B says that each refrigerant must have unique fittings to reduce accidental mixing of refrigerants. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
B) Technician B only
You might also like to view...
This removed view placement technique uses a single reference arrow and view letter pointing to the view where the removed view is taken. The view is then found on the print, and a title is located above the view to correspond with its viewing arrow label, such as A. The removed view is kept in the same alignment as its normal arrangement.
a. alternate method for removed views b. ISO method for removed views c. arrow method for removed views d. aligned method for removed views
Before attempting to connect or disconnect PTO-powered attachments, be sure to _____
a. start the engine and engage power to the PTO b. shut off the engine and disengage the PTO c. attach the PTO shaft guard d. release the wheel brakes
Problem Statement
(a) Computer the vertical displacement of the hinge at C in Figure P8.34. EI is constant for all members, E= 200 GPa, I=1800 x 10 6 mm 4 . (b) The designer would like to offset the vertical displacement of the hinge at C by moving the support A. How far should support A be moved horizontally?
Flat electrodes are sized by _____
a. length b. the width of their widest side c. the area of their cross section d. voltage