Use the formula above to determine the width of each of the 4 required heel miters on an short-radius elbow on 4" pipe with an insulation OD of 8".
a. 1.57
b. 3.14
c. 3.52
d. 6.28
b. 3.14
{[(2 x 4) + 8] x 3.14} ÷ (4 x 4) =
[(8 + 8) x 3.14] ÷ 16 =
(16 x 3.14) ÷ 16 = 3.14
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Formal interpretations of the National Electrical Code® are permitted to be made by the authority having jurisdiction. 2. In the National Electrical Code®, measurements are given in metric units first. 3. The National Electrical Code® is revised and updated every five years. 4. Code rules that provide an alternate method to a specific requirements are called exceptions. 5. All definitions contained in the National Electrical Code® are found in article 100.
____ is a three-dimensional mathematical system.
A. Geometrical datum targeting B. Geometrical datums and tolerancing C. Geometrical dimensioning and targeting D. Geometric dimensioning and tolerancing
The proper way to discharge a capacitor is to:
A) Connect a jumper wire across the terminals. B) Apply 230 volts to the terminals for a short period of time. C) Connect a 20,000 ?, 2 W resistor across the terminals. D) Short across the terminals with a large, insulated screwdriver.
WaterSense certification is available for faucets that deliver a maximum of ____ GPM.
A. 1.5 B. 8.0 C. 21.5 D. 30.5