How many 9-inch line segments are there in a straight line 153 inches long?
What will be an ideal response?
17
You might also like to view...
In order to prime a typical fuel sub-system with a hand-primer pump that has to be installed into the circuit, where should it ideally be located?
A. close to the pick-up tube B. upstream from the primary filter C. upstream from the transfer pump D. downstream from the secondary filter
The cost of constructing a roundabout (R/A) in a low-traffic residential neighborhood 5 years ago was $625,000. A civil engineer designing another R/A that is almost the same design estimates the cost today will be $740,000. If the cost had inÂcreased only by the inflation rate over the 5 years, determine the inflation rate per year.
What will be an ideal response?
Lining fade occurs when ________
A) The friction material overheats B) The brake fluid boils C) Dust particles build up between the friction material and the drum or rotor D) The drum or rotor expands from heat
Hard-drawn copper tubing is harder than soft tubing because _____
a. it has been annealed b. it has other metals combined with the copper c. of the drawing process used to manufacture it d. it has been through a special tempering process after forming