The divisions on Engineer's scales are in increments of ____.

A. tenths of a millimeter
B. eighths of a millimeter
C. tenths of an inch
D. eighths of an inch


Answer: D

Trades & Technology

You might also like to view...

During _______________, genetically engineered microorganisms are grown in large tanks with growth conditions tightly controlled

Fill in the blank(s) with correct word

Trades & Technology

A safer alternative to debrazing components is to:

A) Pressurize the system with 100 psig of nitrogen before debrazing. B) Melt through the pipe with a cutting torch. C) Cut the components out with a hacksaw. D) Cut them out with a tubing cutter.

Trades & Technology

As the temperature of a gas inside a sealed container rises, the pressure __________.

A. increases B. decreases C. stays the same

Trades & Technology

A garage 40' long and 28' wide is to be constructed using 8" block. The concrete footings are to be 2' wide and 8" thick. Determine the cubic yards of concrete needed for the footings rounded to the nearest hundredth.

What will be an ideal response?

Trades & Technology