The marked measurement in the figure above indicates _____
A) 2-1/8 inches
B) 2-3/16 feet
C) 2-1/4 inches
D) 2-1/2 feet
Answer: A
You might also like to view...
A transaxle's lubricant is being checked. Technician A says that the fluid level should be even with the bottom of the filler hole. Technician B says that it should be in the hatch-marked area of the dipstick. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
?Why do you need to be careful not to gouge the pipe bevel surface?
A. ?It makes it harder to align the pipe ends. B. ?Deep gouges can be considered defects. C. ?They can cause the electrode to become stuck if they are too deep. D. ?Because the tack welds are harder to make if the gouges are too close to the root face.
The process of removing heat from a place where it is not wanted and transferring that heat to a place where it makes little or no difference is known as ____.
A. cooling B. refrigeration C. defrosting D. temperature balancing
The specifier who uses standardized methods of construction assumes a high risk of legal actions against himself due to possible errors after starting the project
Indicate whether the statement is true or false