List the materials commonly used to construct duct systems
What will be an ideal response?
Sheet metal, fiber ductboard, and flexible duct
You might also like to view...
The larger contactor sizes are used to provide remote control of relatively high-current circuits where it is too expensive to run the power leads to the remote controlling location.
1. The larger contactor sizes are used to provide remote control of relatively high-current circuits where it is too expensive to run the power leads to the remote controlling location. 2. According to Fleming’s leftÂhand rule, motor action will tend to force the conductor in a downward direction. 3. The function of the blowout magnet is to move the arc downward at the same time that the contacts are opening 4. A mechanically held or latching relay is operated by electromagnets. 5. Mechanically held relays are often used in machine tool control circuits.
When an "A" coil is used in a horizontal application, the coil is laid on its side and a special ____________________ pan is required.
Fill in the blank(s) with the appropriate word(s).
What is VC at the end of the input pulse to an RC integrator if the resistance is 22 k?, the capacitance is 0.05 ?F and the input is a 12 V, 2.2 ms pulse?
A) 10.4 V B) 12 V C) 4.42 V D) 7.58 V
Indirect active solar heating systems usually circulate _____
a. an antifreeze solution in the closed loop b. a synthetic oil blend in the closed loop c. deionized water in the open loop d. an antifreeze solution in the open loop