You are replacing a spring brake chamber on a truck drive axle with a one with a pushrod that must be cut to size. Which of the following MUST be performed to properly fit the new spring brake chamber?
A. replace the pushrod clevis yoke
B. replace the slack adjuster
C. cut the pushrod to size to ensure 90-degree fully-applied slack adjuster angle
D. cut the spring brake bracket to ensure 90-degree pushrod to slack adjuster angle
Answer: C
You might also like to view...
A two-input NAND gate has inputs of 1 and 0; the output is 0
Indicate whether the statement is true or false
An improperly made GMAW restart will create a(n) _____
a. bead overlap b. weave bead c. stringer bead d. weld discontinuity
Which of the following serves as the introduction to the NEC® and provides an overview of the book?
a. NEC Article 90 b. NEC Article 100 c. NEC Section 240.2 d. NEC Section 250.52
While under a deep vacuum, any liquid water under the oil in the motor-compressor assembly can be removed by operating the compressor motor for several seconds without any adverse effect on the system.
Answer the following statement true (T) or false (F)