Calculating an unknown value between two known values is called _____.

a. correspondence of ratios

b. inverting

c. interpolation

d. conversion




c. interpolation

Trades & Technology

You might also like to view...

Technician A says that if a camshaft does not turn easily, the head probably requires straightening. Technician B says that if the cam side of an OHC head is warped excessively, the head can be straightened. Who is right?

A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B

Trades & Technology

A logic control system in an automobile generates an audible alarm when any one, two, or three of the following three conditions occur:

1. The ignition is off but the ignition key has not been removed from the switch and a door is opened. 2. The headlamp switch is on with the ignition off and the key removed from the switch. 3. The ignition is on with the engine running but the driver's seatbelt has not been fastened. Detection circuits generate HIGH inputs to a 3-input logic gate when any of these conditions occurs. The logic gate responds to the high input(s) by generating a HIGH output that triggers the alarm. The 3-input logic gate is most likely a(n): A) OR gate. B) NOR gate. C) AND gate. D) Inversion device.

Trades & Technology

There are 12 risers in a flight of concrete steps. Each riser is 7 1/4" high. What is the overall height in inches of this flight of steps?

What will be an ideal response?

Trades & Technology

When testing the UJT with an ohmmeter, the UJT will appear as a circuit containing two resistors connected in series, with a(n) ____________________ connected to the junction point of the two resistors.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology