Most microswitches require a movement of approximately ____ to change the contact position.
a. 0.38 mm
b. 0.58 mm
c. 0.78 mm
d. 0.98 mm
a. 0.38 mm
You might also like to view...
The terms inside corner and outside corner are referring to _____ .
A. the exact same thing B. completely different methods for constructing corners C. the two most common methods for building corners D. the side of the corners that are plumbed
The internal source resistance of a microphone and the capacitance of the microphone cable form what type of filter network at the input of the amplifier?
A. High-pass filter B. Low-pass filter C. Bandpass filter D. Notch filter
The details of a mechanism are identified on an assembly with:
A. Reference letters contained in circles B. Reference numbers contained in circles C. Either reference letters or reference numbers contained in circles
If the Schematics Netlist for a network is as follows, draw the network.
 FIGURE 1.png)