When measuring oil pump rotor tip clearance, what should the clearance be?
A) 0.0015 inch B) 0.10 mm C) 0.010 inch D) 8 to 10 mm
C
You might also like to view...
A(n) ____ circuit interrupter is a device intended to provide protection from the effects of arc faults by recognizing characteristics unique to arcing and by functioning to de-energize the circuit when an arc fault is detected.
a. extended b. overload c. arc-fault d. closed
How many inches is 381mm plus 3?9-1/4?? plus 5?3-1/8???
a. 10?5-1/4?? b. 11?3-3/8?? c. 10?3-3/8?? d. 10?7-9/16?? e. None of the above
Read the setting on this metric micrometer scale graduated in 0.01 mm.
Fill in the blank(s) with the appropriate word(s).
With no load attached, the voltage at the terminals of a particular power supply is 50.8 V. When a 10-W load is attached, the voltage drops to 49 V. a. Determine vS and RS for this non ideal source. b. What voltage would be measured at the terminals in the presence of a 15-? load resistor? c. How much current could be drawn from this power supply under short-circuit conditions?
What will be an ideal response?