When refilling a hybrid inverter cooling system what tool is recommended?
A) A long funnel
B) Vacuum fluid exchange machine
C) Coolant injector
D) A pressure bleeder
B) Vacuum fluid exchange machine
You might also like to view...
Ricardo replaced some gears in his tractor. They had to be adjusted to 0.08 ± 0.001 of an inch clearance.What are the upper and lower limits?
What will be an ideal response?
The advantage of using an evaporator coil that is an AHRI match for the condensing unit is that
A) Matched systems earn AHRI "Cool Points" which can be redeemed for prizes B) The performance and efficiency of the system are certified C) Matched systems do not require EPA certification for installation D) Matched systems do not require evacuation and charging
A TEV with a dead power element will operate:
A) With a low superheat. B) Correctly until an adjustment is made to the valve. C) With a high superheat. D) With a higher-than-normal evaporator pressure.
__________ is a measure of the amount of light energy that falls on the receiver beyond the minimum amount of light required to operate the sensor amplifier.
A. Sensitivity B. Excess gain C. Field of view