When using a handheld tube cutter to cut copper tubing, the step performed immediately after making the cut
is to _____.
A) measure the tubing
B) remove any burrs from the tubing
C) bend the tubing to the proper angle
D) solder the cut end of the tubing
Answer: B
You might also like to view...
A single fuel cell consists of a(n) ____ sandwiched between two electrodes, an anode, and a cathode
a. electrolyte b. circuit c. plate d. membrane
Gypsum board is a commonly used finish material. It is typically
A) attached directly to a structural metal or wood light-frame. B) attached directly to a suspended metal frame. C) designed to rest on the metal suspension system. D) all of the above. E) A and B only.
It is natural for weeds to fill empty niches in cropping systems
Indicate whether the statement is true or false
The organizational plans that are narrowest in focus and have the shortest time frame are
a. operational plans. b. tactical plans. c. contingency plans. d. strategic plans. e. None of these.