If a compressed-air tool functions poorly because of low air pressure, the cause is most likely _____.
a. working at too great a distance from the compressor
b. an undersized air receiver
c. an improperly secured hose or coupling
d. a sticky air throttle valve
c. an improperly secured hose or coupling
You might also like to view...
Estimate the cost of concrete for a segment of interstate highway designated by your instructor. Include the rural and city components (number of lanes), interchanges, and extended width of lanes for emergency stopping.
What will be an ideal response?What will be an ideal response?
A heavy parcel is placed in the trunk of a vehicle with a rear load-leveling system after the ignition switch has been turned off for 30 minutes. Technician A says the suspension module will quickly restore the rear suspension height to the normal trim height. Technician B says the suspension module will not restore the rear suspension height to the normal trim height until the engine is started. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
How far below the finished surface should snow-melting and anti-icing systems be installed?
a. 1/4 to 1/2 inch (6 to 13 mm) b. 1-1/2 to 2 inches (4 to 5 cm) c. 2 to 3 inches (5 to 8 cm) d. 3 to 4 inches (8 to 10 cm)
Are irrigation water systems divided into two categories, namely, sub-surface and surface?
Indicate by YES (Y) or NO (N).