Motors with shunted field windings:
A) Will not run at full speed or strength.
B) Will draw higher than normal amps.
C) Are hard to detect.
D) Can be detected by comparing the actual winding resistance to the motor manufacturer's data.
E) All of these.
E
You might also like to view...
When water freezes, how much does it expand in volume?
A. 2 percent B. 5 percent C. 9 percent D. 18 percent
How many Btus of heat are removed per hour when the water at a flow rate of 10 lbs. per minute is cooled 15°F? (Water weighs 8.33 lb. per gallon.)
What will be an ideal response?
?Which of the following is/are true about cylinder head porting?
A. ?Porting is usually helpful for street car performance. B. ?Most factory ports flow 40% more air than can flow through the valve opening. C. ?Larger ports can keep air flowing at a higher velocity. D. With smaller ports at lower rpm, fuel tends to fall out of the air-fuel mixture. E. All of the above
To assist in sketching the arc, ____ points are located on the legs of the angle to indicate where the curve is to begin and end.
A. guide B. terminal C. draft D. sketch