All of the following are correct statements about braking EXCEPT ________
A) Kinetic energy of a vehicle doubles when the speed doubles
B) The heavier the vehicle, the greater the kinetic energy when moving
C) If the weight of the vehicle is doubled, the kinetic energy of a moving vehicle is doubled
D) Kinetic energy must be absorbed by the brake system
A
You might also like to view...
What does ‘ER’ represent in Type ITC-ER?
What will be an ideal response?
While having a discussion about O-rings at the bottom of filters, Technician A says that the Automotive Filter Manufacturer's Council recommends that the filter's O-ring be lubricated with oil after installing the filter. Technician B says that the filter's O-ring should be lubricated before installation. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Technician Asays the two windings of the solenoid are called the pull-in and the hold-in windings. Technician B says both windings of the solenoid are continually energized any time the ignition switch is in the start position and the starter motor is spinning. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
When using GTAW for open-root V-groove welds on carbon steel pipe in the 2G position, what can you do
to prevent the weld puddle from sagging? a. Increase the travel speed. b. Increase the welding current. c. Raise the torch work angle slightly, but not more than 10 degrees. d. Drop the torch work angle slightly, but not more than 10 degrees.