FIGURE WD 6-1
In Figure WD 6-1 above, on the far right of the Ribbon, in the Size group, there are two figures. The figure 2.17" is the shape ____.
A. height
B. width
C. diameter
D. rotation setting
Answer: A
You might also like to view...
The digitizer is found in a touchscreen display and is a thin layer of plastic that translates pressure swipes, and other touch actions into digital signals
Indicate whether the statement is true or false
An RFC1514 compliant router will allow broadcast traffic to pass through the router for use with VPN services.
Answer the following statement true (T) or false (F)
Answer the following statement(s) true (T) or false (F)
1. The module name is not part of the I/O points tags associated with the module's input points. 2. Inhibit Module should not be checked during startups and debugging. 3. When entering settings on the Fault/Program screen for a new module, Fault mode is defined as when the controller experiences a major nonrecoverable fault. 4. When configuring an analog output module and Use Fault Value is selected, the value entered in this parameter will be output. 5. In the Fault/Program Action screen, Connection mode is defined as when the controller goes into Program mode or Remote Test mode, or experiences a major recoverable fault or a communications failure.
Construct criteria for selecting an architectural design pattern.
What will be an ideal response?