What are the maximum leakage rates for an air brake system
A. There should be no air leaks
B. The loss rate should be less than three psi in one minute for single vehicles and less than five psi in one minute for combination vehicles
C. The loss rate should be less than two psi in one minute for single vehicles and less than three psi in one minute for combination vehicles
D. None of the above.
Ans: C. The loss rate should be less than two psi in one minute for single vehicles and less than three psi in one minute for combination vehicles
You might also like to view...
Camber refers to
A) downward deflection of a beam. B) upward deflection of a beam to counter downward deflection by a dead load. C) upward deflection of a beam to counter downward deflection by a live load. D) upward deflection of a beam to counter downward deflection by a dead load plus a live load. E) none of the above.
A System 4 design has
a. openness and flexibility. b. flexibility and communication. c. communication and participation. d. participation and flexibility. e. all of these.
All these actions involve verifying the problem EXCEPT ________
A) Look for aftermarket parts B) Check the MIL C) Determine the temperature when the problem occurred D) Look for TSBs
Which of the following is not one of the major factors to consider before any part is made?
A. the material the part will be made of B. the overall size and shape of the finished object C. types of operations required D. the cost of manufacturing the part