Name the construction feature that is placed under the soil below the stem wall and spans between stable supports, where the support can be stable soil or pilings, and the depth and reinforcing required are determined by the load to be supported and then specified on the foundation plan and in details referenced to the foundation plan:
What will be an ideal response?
grade beam
You might also like to view...
Because R-1234yf refrigerant is ________, special equipment is required.
A) Viscous B) Heavier than water C) Red in color D) Slightly flammable
To make sure that a riser will fit snugly, _____.
a. cut just inside the marked line b. cut on the marked line c. cut just beyond the marked line d. cut 1/16" outside the marked line and use a wood rasp to adjust the length
The stretching of the atoms of the dielectric is called dielectric ____.
a. charging b. plating c. elasticity. d. stress
Which of the following statements is LEAST-Likely true?
A. Fuel hose must always be routed so that it is at least 4" (100 mm) away from any part of the exhaust system. B. Fuel injection lines do not maintain pressure when the engine is off. C. Catalytic converters run hotter than the rest of the exhaust system. D. Fuel hoses should not be any closer than 10" (284 mm) from a catalytic converter.