The proper order in which to perform a four-wheel alignment is ________

A) Rear camber, front camber, caster, front toe, rear toe
B) Front camber, caster toe, rear camber, then rear toe
C) Front toe, camber, front caster, rear camber, then rear caster
D) Rear camber and toe, front camber, caster, then front toe


D

Trades & Technology

You might also like to view...

One inch of water penetrates the loam soil about _____ inches

A) five B) twenty C) eight D) sixteen

Trades & Technology

Arc strikes will always appear when an acid ____________________ is used.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Which of the following allows air-to-water systems to run more efficiently than air-to-air systems?

A) Supplemental heat is energized all the time. B) They do not need to be defrosted. C) Cold temperatures are an optimal environment. D) Auxiliary heat is not needed as much.

Trades & Technology

De-burring tools are used for:

A) Preparing a compressor head before applying a head gasket. B) Removing rough edges from electrical wiring. C) Removing splinters from wood frame members. D) Removing the small burr left by pipe cutters.

Trades & Technology