Single-space beams are typically referred to as ____.

A. Tudor arch
B. CMUs
C. glu-lams
D. anchors


Answer: C

Trades & Technology

You might also like to view...

An engine main bearing clearance specification is stated to be 0.0035 inches.  What color Plastigage™ is required to measure actual clearance?

A. green B. red C. blue D. yellow

Trades & Technology

A liquid limit test conducted in the laboratory on a sample of soil gave the following results listed below. Determine the liquid limit of this soil from a plot of the flow curve.



What will be an ideal response?

Trades & Technology

Inner CV joints must _______

A) Allow the wheels to travel up and down over bumps B) Become shorter or longer as the suspension moves C) Both A and B D) Neither A nor B

Trades & Technology

What is the lowest percentage of full capacity that a digital scroll can be safely operated for extended periods?

A) The minimum capacity is 10% to ensure that the compressor gets proper lubrication. B) The compressor can be operated at 0% by simply leaving the unloading solenoid energized. C) The digital scroll compressor cannot be operated below 50% capacity. D) The digital scroll compressor can only operate at full capacity.

Trades & Technology