The front view is usually most important because it is the one from which the other views are established.
Answer the following statement true (T) or false (F)
True
You might also like to view...
A fire that has been started in electrical wiring should be extinguished with a fire extinguisher suitable for:
A. A type fires B. B type fires C. C type fires D. D type fires
What type of drawing is drawn after a construction project is finished to document final construction?
What will be an ideal response?
Hot liquid is flowing in a steel pipe with a 22-mm inner diameter and a 27-mm outer diameter. The pipe outer surface is subjected to a uniform flux of 1200 W/m2 for a length of 1 m. The pipe inner surface is coated with a thin polyvinylidene fluoride (PVDF) lining. The hot liquid flowing inside the pipe has a mean temperature of 120°C and a convection heat transfer coefficient of 50 W/m2•K. The ASME Code for Process Piping (ASME B31.3-2014, A323) recommends a maximum temperature for PVDF lining to be 135°C. Does the surface temperature of the PVDF lining comply with the recommendation of the code?
What will be an ideal response?
Regarding sequence types, which one of the following is NOT one into which all SFCs can be grouped?
A) Selection convergence B) Simultaneous divergence C) Single sequence D) Loop sequence