A solenoid valve is opened or closed by the movement of the ____.
a. solenoid
b. electromagnet
c. magnetic plunger
d. valve
c. magnetic plunger
You might also like to view...
Which of the following is true of the cover pass?
A. It should be more than 1/8 inch wider than the groove opening. B. It should not be uniform in reinforcement. C. It need not be free of defects such as porosity or overlap. D. It should be neat looking.
In the Media Oriented System Transport (MOST) data bus system, what changes light signals into voltage that is then transmitted to the MOST transceivers?
What will be an ideal response?
Technician A says that the diameter of a bolt is the same as the wrench size used to remove or install the fastener. Technician B says that the length is measured from the top of the head of the bolt to the end of the bolt. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Before operating the vertical band machine, you should:
A) Check the speed range transmission oil level B) Check the hydraulic oil level C) Lubricate the variable speed pulley hub D) All of the above