Technician A says that 40-grit sandpaper is the best to use when stripping old finish from aluminum hoods. Technician B says that aluminum is used in automobile manufacturing because it doesn’t corrode. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
D. Neither Technician A nor B
You might also like to view...
_____ brick is intended to support pedestrian or light vehicular traffic.
A. Thin B. Building C. Facing D. Paving
All of the following statements are true EXCEPT:
A. when the engine is on, the battery provides power for electrical accessories that are turned on. B. during cranking, the battery supplies current to the starter. C. the battery works like a capacitor, absorbing high-voltage surges that sometimes happen in the electrical system. D. when the engine is running and electrical demands are more than the charging system can contribute, the battery serves as a reservoir, supplying electrical energy for the extra loads.
Most port fuel-injected engines operate on how much fuel pressure?
A) 55 to 65 PSI (380 to 450 kPa)
B) 35 to 45 PSI (240 to 310 kPa)
C) 9 to 13 PSI (62 to 90 kPa)
D) 3 to 5 PSI (21 to 35 kPa)
Use the following the following diagram for problems 3 through 10.
In the diagram above, what are the coordinates of the figure represented by (x5, y5)?
What will be an ideal response?