Mean and percentiles are concepts used in _____ to describe data.
A. geometry
B. statistics
C. databases
D. organizations
Answer: B
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. An angularity tolerance is a geometric tolerance that limits the amount a surface, axis, or center plane is permitted to deviate from a basic angle relative to a datum reference frame. 2. When angularity is applied to a surface, the tolerance zone applies to the axis or center plane of the unrelated actual mating envelope. 3. When an angularity tolerance is applied to a feature of size, the feature control frame is placed below or beside the size dimension. 4. When an angularity tolerance is applied to a planar surface, the angularity deviation of a surface is verified by finding the distance between two parallel planes, at a specified angle, that all of the points of the surface are located between. 5. When an angularity tolerance (at MMC) is applied to a feature of size, the angularity deviation is often verified by either passing an internal feature of size through a virtual condition boundary (a functional gage) or passing a virtual condition boundary (a functional gage) into an external feature of size.
When a four-wheel-drive vehicle with an automatic ride control (ARC) system is operating in four-wheel drive at 15 mph, the suspension module:
A. Increases the suspension height 1 inches B. Decreases the suspension height 2 inches C. Switches the air springs to the firm mode D. Increases the suspension height 2 inches
What minerals do horses require in their rations?
What will be an ideal response?
Supplementary essential variables are required if impact testing is to be performed
Indicate whether the statement is true or false