Two measuring systems for linear measurments are ___________ and ______________.
Fill in the blank(s) with the appropriate word(s).
English system and metric system
You might also like to view...
The air pressure gauges, fuel level gauge, and voltmeter do not operate on an International truck with a body controller. All other gauges such as the tachometer and engine oil pressure gauge are operating correctly. Which of the following is the most likely cause of the inoperative gauges?
A. Short circuit between CAN + and CAN - B. CAN + is shorted to ground. C. Missing terminating resistors. D. An open CAN + or CAN - circuit between the body controller and the electronic gauge cluster.
Holes are to be drilled in the length of angle iron as shown in the accompanying figure. What is the distance in inches between two consecutive holes?
A. 3 1/4 B. 3 1/2 C. 3 3/4 D. 4
Temporary voltage reductions are called ____.
A. Spikes B. Sags C. Swells D. Blackouts
Name the line type used to terminate features on a drawing when the extent of the feature has been clearly defined and no additional detail is needed.
What will be an ideal response?