What is one possible result of over greasing a component?
a. there won't be enough clearance between moving parts
b. a lip type seal could get blown out
c. the grease will get too thin from too much pressure d. there will be cross contamination of fluids
B
You might also like to view...
What two functions does the evaporator of a domestic refrigerator perform?
A. Filters and cools the air. B. Absorbs and dissipates heat. C. Humidifies and cools the air. D. Dehumidifies and cools the air.
Which of the following is required practice when refilling a differential carrier housing with lube after an oil change?
A. fill with an API GL-5 rated lubricant to the bottom of the filler hole B. add an additional 2 pints (1 liter) to the power divider fill hole C. jack the axle sequentially at either end to ensure lube reaches the wheel ends D. all of the above
The magnitude of the controller output will increase as the reset time programmed into the controller is made ____.
A. smaller B. larger
The acronym MPT associated with a fitting means that a _____
A) pipe thread is cut at a medium pitch for the pipe size B) pipe thread is tapered C) male pipe thread is needed to make a connection D) pipe thread is male in gender