A ____ topology does not have multiple transmission paths.
A. star
B. mesh
C. cluster-free
Answer: A
You might also like to view...
Erosion protection may be required during which of the following steps of the construction process?
a. while topsoil is being removed b. after rough grading c. after final grading d. all of the above
Name the type of drawing where the three principal planes and edges make equal 30° angles, and the angles between each of these three isometric axes are 120°.
What will be an ideal response?
To ensure some measure of uniformity in industrial drawings, the American Society of Mechanical Engineers (ASME) has ____.
A. passed blueprint regulations B. recommended measurement standards C. published drafting standards D. instituted an annual review board
The size of teeth of a gear can be found if given the proper type of information. For example, the circular pitch of the gear is equal to p (3.1416) divided by the diametrical pitch, and the outside diameter is equal to the pitch diameter added to twice the amount of the dedendum. The trick is to know which pieces of information will help find the answer in the least amount of time. If you are given values to any of the answers below, you will be able to find the size of teeth of this particular gear. Which one will give you the answer in the least amount of time?
A. You are given the circular thickness. B. You are given the addendum and the whole depth. C. You are given the circular pitch and the number of teeth. D. You are given the number of teeth, the pitch diameter, and the diametrical pitch. E. You are given the outside diameter, the addendum, the whole depth, and the number of teeth