Contractors and technicians performing TAB services typically require certification by an independent TAB standards and certification organization such as:
A) UL or CSA. B) NEBB or AABC. C) The EPA or DOE. D) AHRI or GAMA.
B
You might also like to view...
What is the major problem with using pneumatics for robots and how do we correct it?
What will be an ideal response?
In general, the floor area of a garage, up to a level of 18 in. (450 mm) above the floor, is considered to be a ____ location.
A. Class I, Division 1 B. Class I, Division 2 C. Class II, Division 1 D. Class II, Division 2
Which of the following CANNOT be measured using a straightedge and a feeler gauge?
A) Cylinder head flatness B) Straightness of the main bearing bores C) Straightness of the cylinder bore D) Block deck flatness
The permanent discharge line on a reversing valve is always located
A) On the right on the side with three large lines B) On the left on the side with three large lines C) By itself opposite the side with three large lines D) In the middle on the side with three large lines