When cutting ____________________ diameter pipe, the torch tip is always pointed toward the center of the pipe.
Fill in the blank(s) with the appropriate word(s).
large
You might also like to view...
In a step-down transformer with a 4.16kV primary delta connection and a 480/277V wye secondary, the transformer turns ratio is _____.
a. 5:1 b. 9:1 c. 11:1 d. 15:1
? Identify and state the historical significance of John Smith.
What will be an ideal response?
Actual measurements taken from the blueprint drawing can not be converted to the actual lengths and an estimate should be used.
Answer the following statement true (T) or false (F)
Mixed format: 
(with a space between the whole number and the numerator)Fraction format: 
Reduce all fractions. A motor commutator 
inches in diameter is turned down to remove a flat spot. If 
inch is removed from the surface, find the finished diameter.
Fill in the blank(s) with the appropriate word(s).