Based on the accompanying figure, describe how the additional button is added to the circuit.
Figure
ANSWER: The second push button will be added to the control circuit by connecting it in series with the existing STOP push button.
You might also like to view...
In some locales, wind and seismic forces require the use of a(n) ____ to improve the lateral (side-to-side) strength of an exterior wall.
a.shearwall b.embankment c.buttress d.abutment
On a vehicle with a manual transmission, what components should be inspected while the engine is removed from the car?
What will be an ideal response?
How much air flows through the PCV system when the engine is at idle speed?
A) 1% to 3% B) Up to 30% C) 5% to 10% D) 10% to 20%
When fitting a fifth wheel to a truck frame, what is the minimum distance ahead of the 5th wheel pivot centerline the angle iron brackets should extend?
A. 6-inches B. 12-inches C. 18-inches D. 24-inches