What is a Type B sprocket?
What will be an ideal response?
Type B sprockets have a hub on one side only. The flat side should be mounted close to the bearings on the machine where it's mounted.
You might also like to view...
El silicato de calcio/la perlita expandida se fabrican en:
a. tubos de media sección o bloque largo de 36 pulgadas (91,44 cm). b. secciones precortadas de 36 pulgadas (91,44 cm). c. formas largas en bloque de 48 pulgadas (1,21 m). d. capas individuales de 6" (15,24 cm) de grosor.
The torque convertor assembly is comprised of a(n) ____________________, a(n) ____________________ and a(n)____________________.
Fill in the blank(s) with the appropriate word(s).
Which of the following is true of system planning regarding parts design?
A. The robot's arm can reach any place accessible to the welder. B. Mockups and CAD/CAM can be used after the robot is installed to reduce problems. C. The parts design should consider the lower heat input from automated processes. D. When possible, all welds should be performed in the flat position.
Which term describes the process of manually adjusting variables such as speed, load, and spark timing to determine the optimum output settings for the computer?
A) Engine mapping B) Signal conditioning C) Reflashing D) Performance programming