ASE-Style Multiple Choice
The term MOST-Likely used to describe surface damage that does not penetrate or fracture the back of the panel is:
A. cosmetic damage
B. single-sided damage
C. exterior damage
D. structural damage
Answer: B
You might also like to view...
Heater hoses often develop leaks ________.
A) In the center of the hose B) When there is a bad ground C) Near the hose clamps D) When coolant is used
A transducer using the capacitance principle consists of two concentric cylindrical electrodes. The outer diameter of inner cylinder is 4mm. The inner diameter of the outer electrode is 4.2mm. The length of the electrode is 0.03m. Calculate the change in capacitance if the inner electrode is moved through a distance of 1.5mm.
What will be an ideal response?
(a)In Figure P8.15 compute the vertical and horizontal components of displacement of joint E produced by the loads. The area of bars AB, BD, and CD = 5 in. 2 ; the area of all other bars = 3 in. 2 . E = 30,000 kips/in. 2 . (b) If bars AB and BD are fabricated 3 4 in. too long and support D settles 0.25 in., compute the vertical displacement of joint E. Neglect all the applied loads.
In an emergency situation, you should never
A. call 911 until you are sure the victim is conscious and gives permission B. move an injured or seriously ill person unless necessary to prevent further injury C. administer CPR D. report an injury to the supervisor