The turns ratio of the first secondary is 1:____.
a. 2.14
b. 3.55
c. 4.67
d. 5.77
c. 4.67
You might also like to view...
Water is initially at 150°C and a pressure of 1000 kPa. The volume in the container is sloWater is initially at 150°C and a pressure of 1000 kPa. The volume in the container is slowly increased, causing the pressure to decrease, until the pressure is 80 kPa. The saturation pressure of water at 150°C is 475.8 kPa. The temperature of the water is maintained at 150°C through the process. Show the process on a P-v diagram, and describe what happens to the water during the process.wly increased, causing the pressure to decrease, until the pressure is 80 kPa. The saturation pressure of water at 150°C is 475.8 kPa. The temperature of the water is maintained at 150°C through the process. Show the process on a P-v diagram, and describe what happens to the water during the process.
What will be an ideal response?
Within an air distribution system, the lowest pressure level is found at the _____.
a. conditioned space b. input to the return duct c. input to the blower d. output of the blower
Technician A says that riveted disc brake pads are often quieter that bonded disc brake pads. Technician B says that integrally molded disc brake pads are molded into holes in the steel backing of the pads. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Which of the following is NOT a sensor in an ATC system?
A) Sun load sensor B) Passenger sensor C) In-car temperature sensor D) Ambient air temperature sensor