An air-cooled R-12 refrigeration system is operating normally with a suction pressure of 25 psig and a head pressure of 136 psig. Which of the following represents a possible set of operating pressures if the condenser fan motor burns out?
A. high side 136 psig, low side 25 psig
B. high side 100 psig, low side 15 psig
C. high side 200 psig, low side 20 psig
D. high side 180 psig, low side 35 psig
Answer: D
You might also like to view...
Many two-stroke power equipment engines use ____ on the intake side of the induction system.
a. peek valves b. side valves c. wear valves d. reed valves
To prepare for construction, formwork must be properly _____.
a. inventoried b. staged c. located d. stored
Many coaxial heat exchangers are made of ____.
A. steel B. aluminum C. nickel D. cupronickel
On a typical plot of the refrigeration cycle, where does liquid refrigerant first begin forming in the condenser?
A) Where the condenser line (the top line) crosses the saturation curve from the superheated region B) At the end of the condenser line where it crosses the saturation curve into the subcooling region C) In the middle of the condenser line (the top line) D) At the start of the condenser line ( the top line), immediately after the compressor line