The electrical properties of a bus include all of the following except ________
A) signal format B) connector pin spacing
C) data rate D) clock frequency
B
You might also like to view...
In a DC, 12 volt circuit supplying a single lightbulb, voltage drop across the load is measured at fractionally under 12 volts. When a second identically rated bulb is wired in series with this circuit, approximately how much voltage should dropped across each bulb?
A. 24 volts B. 12 volts C. 6 volts D. 4 volts
?Is there any benefit to the mill scale that can be found on almost all hot rolled steel?
A. ?It can help the deoxidizers in the filler metal to react with the weld to make a better weld. B. ?It can help to prevent rust from forming. C. ?It acts like a dam along the sides of the weld pool to keep the weld bead from getting too wide. D. ?No it has no benefit.
Derive the equations for slope and deflection for the beam in Figure P7.6. Determine the slope at each support and the value of the deflection at midspan. Hint: It has been determined that the maximum deflection occurs at x = 0.544L such that the slope is zero there.
At resonance, the current in Figure 13-2 is ________
A) 10 mA B) 10 A C) 1.66 4 D) 1.66 mA