The distance from a point on a screw thread to a corresponding point on the next thread as measured parallel to the axis is known as ____________________.
Fill in the blank(s) with the appropriate word(s).
pitch
Trades & Technology
You might also like to view...
A 1-in-diameter rod, 3 ft long, of unknown material is found in a machine shop. A variety of inexpensive nondestructive tests are readily available to help determine the material, as described below:
Trades & Technology
Where a diameter is used as a primary datum feature at MMB, ____________________ degrees of freedom are constrained.
What will be an ideal response?
Trades & Technology
Aerial roots are able to get water directly from the ____________________
Fill in the blank(s) with correct word
Trades & Technology
What should be done first before removing the starter motor from the vehicle?
A) Disconnect battery cables B) Disconnect starter relay C) Remove starter solenoid D) Remove battery
Trades & Technology