Name two types of bearing inserts other than piston bearings.
What will be an ideal response?
Camshaft and thrust bearings are the other types of bearing inserts other than piston bearings.
You might also like to view...
The flow switch is constructed from a snap-action ____.
a. dual switch b. micro-switch c. dip switch d. pressure switch
Consider the building in Figure P2.22, which has a width into the page of 35 ft. Maximum inundation height, h max , and flow velocity, u max , have been determined as 33 ft and 20 ft/sec, respectively. Calculate the hydrodynamic load applied at floor level on the wall IJKL for Load Cases 2 and 3, due to outflow. If windows are inundated, calculate the expected hydrostatic loading on the adjacent outside walls due to water retained by the floor, or floors. Finally, calculate the debris impact load to be applied to the free-standing column CD. Assume I tsu = 1.0 and C d = 1.25.
How many brushes are typically used in the automotive starter?
A) 2 B) 8 C) 4 D) None of these
The advantage of a phototransistor over a photodiode detector is that __________.
A. it operates at higher frequencies B. it has greater light sensitivity C. it is linear D. it has small temperature coefficients