The organization, office or individual responsible for approving equipment, materials, and installation procedures, is the ________.
A. Chief Electrical Inspector
B. Electrical Inspector
C. Authority Having Jurisdiction
D. Chief Fire Inspector
C. Authority Having Jurisdiction
You might also like to view...
A ____ equals one thousandths (1/1000) of a meter.
a. millimeter b. centimeter c. decimeter d. micrometer
Why was there such a notable lowering of ethical standards in American politics and business immediately following the high idealism of the Civil War? What was the political response to the lowering of ethical standards in American politics in the 1870s and early 1880s? Was this political response effective in curbing corruption in American politics?
What will be an ideal response?
Which of the following statements about battery ratings is true?
A. The ampere-hour rating is defined as the amount of steady current that a fully charged battery can supply for 1 hour at 80°F (26.7°C) without the cell voltage falling below a predetermined voltage. B. The cold cranking amps rating represents the number of amps that a fully charged battery can deliver at 0°F (-17.7°C) for 30 seconds while maintaining a voltage above 9.6 volts for a 12V battery. C. The cranking amp rating expresses the number of amperes a battery can deliver at 32°F (0°C) for 30 seconds and maintain at least 1.2 volts per cell. D. The reserve capacity rating expresses the number of amperes a fully charged battery at 80°F can supply before the battery’s voltage falls below 10.5 volts.
The weight of one square foot of steel one inch thick is 40.80 lbs. A steel bar 1/2 inch thick × 6 inches × 8 feet long is priced at $.95 per pound. What is the cost of the bar?
A) $ 136.80 B) $ 38.76 C) $ 273.60 D) $ 77.52