The terms of a ratio must be expressed in the same units.
Answer the following statement true (T) or false (F)
True
You might also like to view...
The thickness of tilt-up wall panels is obviously related to the magnitude of stresses caused in them due to the loads on the panels. Two types of stresses are caused in panels: (i) the stresses caused by gravity loads and lateral loads after the building has been constructed, i.e., in-service loads and (ii) stresses caused during the lifting and erection of panels. Which of these two stresses
determines the panel thickness and why? What will be an ideal response?
Screw jacks must be installed into trenches according to the same horizontal and vertical spacing requirements as those for _____.
a. aluminum hydraulic shores b. aluminum pneumatic shores c. trench boxes d. timber
The metal control hardware used to relieve stresses caused by expansion and contraction in large ceiling or wall expanses in interior drywall systems is called a(n) _____.
a. L-bead b. J-bead c. corner bead d. expansion joint
Which of the following statements is true?
A) During part load operation, refrigerant is forced through the smaller riser. B) During full load operation, refrigerant is forced through the smaller riser. C) During full load operation, refrigerant is forced through the larger riser. D) During part load operation, refrigerant is forced through the larger riser.