Describe the weld(s) required to join A1 to A2.
Review drawing number 523838C0A and then answer the question.
3/16 inch fillet weld all around, GMAW Spray Transfer
You might also like to view...
In the diagram, if side CD is equal to 12 inches, AB is equal to 3 inches, and side ED is equal to 10 inches, what is the measure of side EB?
Fill in the blank(s) with the appropriate word(s).
The purpose of the charcoal filter in the vacuum hose between the engine and the vacuum brake booster is to ________
A) Act as a one-way check valve to help keep a vacuum reserve in the booster B) Filter the air entering the engine C) Trap gasoline vapors to keep them from entering the booster D) Direct the vacuum
Technician A says that SAI and included angle should be within 3 degrees from side to side for proper handling. Technician B that says the vehicle will pull to the side with the least SAI. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Technician A says that waterborne paint is not toxic, and therefore an SDS does not need to be available and consulted. Technician B says that the explanation of personal protective equipment needed when spraying waterborne paint can be found in Section 8 of the SDS. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B