The jack shown in the figure above is a(n) _____.
a. screw jack
b. toe jack
c. bottle jack
d. ratchet jack
c. bottle jack
You might also like to view...
The water pump housing includes a drain hole, known as a(n) ____________________ hole.
Fill in the blank(s) with the appropriate word(s).
Which of the following describes the work area subsystem?
a. It consists of the telecom outlets at the end user location and associated patch cables providing final connectivity. b. It is the area where all subsystems for an individual building connect. c. It consists of the patch panels, cables, support structures, and hardware that deliver voice/data connectivity to the end user outlet station. d. It consists of the blocks, cables, pathways, and hardware that provide connectivity between ERs, TRs, and MCs.
The two kingdoms all living things are divided into are the ____________________ kingdom and the ____________________ kingdom
Fill in the blank(s) with correct word
A dc series motor is driving a fan-type load. The armature and field resistances of the motor are 2 ? and 3 ?, respectively. When the terminal voltage of the motor is 200 V, the motor speed is 250 rpm and the armature current is 10 A. Assume that the motor operates at the linear region of the field-current characteristic. Calculate the terminal voltage needed to reduce the motor speed to 100 rpm. Also sketch the speed-torque characteristics and show all operating conditions.
What will be an ideal response?