There are two types of floor nailers used for installing hardwood and softwood flooring. The advantage a pneumatic floor nailer has over a manual floor nailer is ________
A) The pneumatic floor nailer requires compressed air to operate
B) The pneumatic floor nailer requires only a light blow to the plunger to drive in nail
C) The pneumatic floor nailer can overdrive nails into the flooring
D) The pneumatic floor nailer has an adapter plate to maintain a proper angle
B
You might also like to view...
Why must a tensioner tool be used on duct tie straps?
What will be an ideal response?
Before opening the compressor crankcase to take an oil sample, you should:
A) Increase the crankcase pressure with nitrogen to at least 100 psig. B) Get the sample tube ready because the oil comes out very quickly under pressure. C) Valve off the compressor and recover the refrigerant down to 1 - 2 psig. D) Position yourself directly in front of the drain port.
What is the Malcolm Baldrige National Quality Award?
What will be an ideal response?
The primary output bit of the timer-on delay becomes set __________.
A. when the rung condition is true for the amount of time indicated by the PR value B. when the amount of time indicated by the PR value has been reached after a momentary true condition of its rung C. when the amount of time indicated by the PR value has been reached after the true-to-false transition of the rung has occurred