What general maintenance task performed on heat exchangers is a surface cleaning technique that uses acid to remove scale or other deposits from accessible surfaces?
A. Acidizing
B. Backwashing
C. Water blasting
D. Sandblasting
A. Correct. Acidizing is a surface cleaning technique that uses acid to remove scale or other deposits from accessible surfaces.
B. Incorrect. Backwashing (back-flushing) is a procedure in which the direction of flow through the exchanger is reversed to remove solids that have accumulated in the heat exchanger.
C. Incorrect. Water blasting is a surface cleaning technique used on heat exchangers that uses high-pressure jets of water to remove scale or other deposits from the inside of exchanger tubes.
D. Incorrect. Sandblasting is a surface cleaning technique involving entraining sand into a stream of high-pressure air to remove scale or other deposits from accessible surfaces.
You might also like to view...
The central processing unit of a programmable logic controller is sensitive to what two things?
What will be an ideal response?
? Identify and state the historical significance of the Monitor.
What will be an ideal response?
Pipe welding requires the use of electrodes that produce ____________________ penetration
Fill in the blank(s) with the appropriate word(s).
To close the control circuit and start a system, a remote bulb thermostat depends on a _____
a. bimetal strip that expands or contracts b. refrigerant-filled bulb that responds to temperature changes c. mercury-filled bulb that responds to temperature changes d. thermocouple that changes its resistance as the temperature changes