What is the maximum amount of available torque that can be transmitted to one of the drive axles when a torque proportional interaxle differential is used?

A. 25%
B. 50%
C. 75%
D. 90%


Answer: C

Trades & Technology

You might also like to view...

When leading a horse during English equitation, stand at the ____________________ shoulder of the horse with the reins in your right hand, and the excess, or bight, of reins in your left hand.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

What is commonly used in single-sideband systems to attenuate the unwanted sideband?

A. Passband B. Stopband C. Wire leads D. Crystal filter

Trades & Technology

Why should hermetic compressors not be operated in a vacuum?

What will be an ideal response?

Trades & Technology

Three different materials are shown in the section view of an object. The upper portion is made of a bronze material and is a horizontal rectangular piece. Under the bronze material, the remaining space is evenly divided vertically with a steel material on the left and a cast iron material on the right. Which of the following is (are) true?

A. If the bronze section lines are drawn at a 45° angle, then the steel and cast iron section lines could be drawn at a 135° angle. B. If the bronze section lines are drawn at a 45° angle, then the steel section lines could be drawn at a 135° angle, and the cast iron section lines could be drawn at a 90° angle. C. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 180° angle. D. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 60° angle. E. none of the above

Trades & Technology