When using datum targets to establish a complete datum reference frame, which three requirements should be met?

What will be an ideal response?


ANS:
When using datum targets to establish a complete datum reference frame (a datum reference frame that constrains all six degrees of freedom), three requirements should be met:
1. Datum targets should be located and defined with basic dimensions to ensure repeatability between the part and the datum feature simulators.
2. The datum reference frame must constrain all six degrees of freedom of part movement in space.
3. The part dimensioning must ensure that the part will have only one orientation and location in the datum feature simulator.

Trades & Technology

You might also like to view...

Describe three ways that you can identify that a change has been made on a print?

What will be an ideal response?

Trades & Technology

What are the common routes of transmission for zoonotic disease?

What will be an ideal response?

Trades & Technology

A clutch is slipping. What could be the cause?

A. An oil-soaked clutch disc B. A weak pressure plate C. A sticking clutch cable D. All of the above

Trades & Technology

?What is the first step in selecting a circulator for a fluid-filled circuit?

A. ?Determine the desired system flow rate based on thermal and flow requirements of the heat emitters. B. ?Use the system loss curve to determine the head loss of the system. C. ?Research the coefficient of performance of the pump. D. ?Select a circulator that delivers ten percent more head than required.

Trades & Technology