The dead center is correctly adjusted by turning the tailstock handwheel until a resistance is felt and then:
A) Backing off so there is some end play
B) Turning in one-fourth turn
C) Stopping
D) Backing off until the dog bent tail clicks freely in the slot
D
You might also like to view...
When the stem of a butterfly valve is parallel to the line of flow, the valve is _____.
a. closed b. half-closed c. open d. dysfunctional
To check the temperature leads of an electronic thermometer for high temperature, they should be ____.
A. placed on the bottom of a pan of boiling water B. suspended in a pan of boiling water C. suspended in the vapor above a pan of boiling water D. suspended in a pan of boiling water located at least 1,000 ft. above sea level
Ducks and geese are raised for their ____________________ as well as their meat
Fill in the blank(s) with correct word
To avoid electrical shock, technicians should:
A) Make sure they are grounded. B) Make sure they are not grounded and the unit is grounded. C) Make sure the unit is grounded. D) Make sure they are not grounded.